MiraScreen 5G User Manual

User Manual
Rev. 1.20

MiraScreen 5G Specifications

General

Brand	MiraScreen
Model	5G
Category	Computer Hardware
Language	English

Summary

Introduction

Hardware Installation

Hardware Setup Steps

Connect WiFi cable, plug into TV HDMI, plug USB power adapter.

Hardware Button

Mode Switching

Switch between AirPlay and Miracast modes.

WiFi Band Switching

Press button for 5 seconds to change WiFi frequency band.

For iOS(iPhone/iPad) AirPlay Mirroring

MiraCast for Android

AirPlay Mirroring for Mac OS X

MiraCast for Windows

Switch MiraScreen 2.4G/5G band

Setting and Firmware Upgrade

Internet Connection Setup

Setup router connection for MiraScreen; connection may disconnect.

Language Setting

Change the language of MiraScreen.

Password Change

Change the password of MiraScreen.

Default Mode Selection

Select AirPlay or Miracast as boot up default mode.

Resolution Setting

Change output resolution of MiraScreen.

Firmware Upgrade

Upgrade the firmware of MiraScreen; requires internet.