Step 1: Switch to Airplay mode by pressing button,
and then get the IP address of your MiraScreen on
screen.
Step 2: Use browser on your device to access the
IP address of MiraScreen, and select your WiFi
router.
Step 3: Enter password.
Step 4: Connect to your WiFi router.
Setting and Firmware Upgrade
After connected with MiraScreen, an IP address will
be shown on setup screen. Please launch browser
on your devices (iOS/Androd/Mac/Windows etc.)
and then enter the IP address accordingly (ex:
192.168.203.1)
• Internet: Setup the router connection for your
MiraScreen. (Note: The connection between
MiraScreen and your device may be
disconnected when you switch to router
connection)
• Language: Change the language of MiraScreen
• Password: Change the password of MiraScreen
• Default Mode: Select AirPlay or Miracast as boot
up default mode
To Next Page
Loading...