Please follow below steps to setup MiraScreen:
Step 1: Connect WiFi cable (micro USB head) to
MiraScreen dongle main body.
Step 2: Plug the MiraScreen into the HDMI port of
your TV and switch to the right input source.
Step 3: Plug USB cable into an external USB power
adapter.
Note: 1 Amp current supply is highly recommended
for reliable Wi-Fi connection.
Step 4: You should see the main MiraScreen page
after power on
Hardware Button
1) Mode Switching: Switch between AirPlay and
Miracast Mode
2) 2.4GHz/5GHz WiFi Switching: Press 5 seconds
for changing the WiFi frequency band.
To Next Page
Loading...