Miroir L500S User Manual

2
Your Miroir L500S Full HD 1080p Projector
3
C
E
F
G
H
I
J
B
D
A
A Audio Out (3.5mm) - (Optional) Connect an external
speaker or headphones.
B USB Power and Media Reader Jack – Connect a USB
Power cable to provide power to an HDMI streaming stick.
Plug a USB stick into the port and play movies, or share
pictures.
C HDMI Video Input - Connect an HDMI cable to a device
that supports HDMI video output.
D Power Port - Connect included AC Adapter for power. DC
In - 19VDC@3.7A
E Volume Up and Down - Increase/decrease the volume
output of the projector.
F HDMI Control - Switch between HDMI-1 and HDMI-2.
G Power Button - Turn the projector on/o
H Focus Controls - Turn wheels to adjust focus and keystone.
I Cooling Vent - IMPORTANT: Do not cover or block airflow
to the vent.
J Rubber Foot Pads - Provides stability and proper airflow
to cooling vents.

Miroir L500S Specifications

General

Brightness	500 ANSI Lumens
Resolution	1280 x 720 (HD)
Contrast Ratio	1000:1
Throw Ratio	1.2:1
Aspect Ratio	16:9
Power Supply	AC 100-240V, 50/60Hz
Lamp Life	30, 000 hours
Connectivity	HDMI, USB, 3.5mm audio
Projection Distance	1.5 to 3.5 meters
Throw Distance	1.5m to 3.5m
Speaker	3W

Summary

Remote Control Overview

Connecting Your Projector Wirelessly

WIFI Setup

Connect the projector to your WiFi network and configure streaming services.

Screen Mirroring

Wirelessly mirror content from iOS, Android, Laptop, or Tablet devices.

Connecting Your Projector with a Cable

Laptop HDMI Connection

Connect to a laptop using an HDMI cable for video output.

Device HDMI Connection

Connect to other devices supporting HDMI output, possibly with an adapter.

MacBook USB-C Connection

Connect to a MacBook via USB-C using a Digital AV Multiport Adapter.

Apple Device Lightning Connection

Connect to Apple devices using Lightning with a Digital AV Adapter.

Streaming Stick HDMI Connection

Connect a streaming stick via HDMI and USB power.

Adjusting Projector Image Settings

Keystone Correction

Use four-point keystone correction for image alignment, +/- 15 degrees.

Image Zoom Adjustment

Adjust image size based on projector distance using the zoom feature.

Troubleshooting Common Issues

Blurry Image Solutions

Check focus, projection surface, and lens cleanliness for blurry images.

Non-Square Image Solutions

Ensure projector alignment with a flat projection surface for square images.

No Sound Problems

Verify volume settings, adapter compatibility, and cable connections for audio.

No Signal Message

Check cable/adapter, device settings, and source device output for signal issues.

Power On Issues

Ensure the AC power adapter is securely plugged into the projector and outlet.

Support and Manual Information