What to do if my Miroir Projector will not power on?
If your Miroir Projector won't power on, check the battery life by briefly pressing the power button. If one or fewer lights illuminate, charge the projector.
What to do if my Miroir Projector says 'No Signal'?
If your Miroir Projector displays a 'No Signal' message, ensure you're using the correct cable and/or adapter. If using a digital AV adapter, verify it's a genuine Apple adapter compatible with your device. For USB-C connections, use a 'USB-C Video' cable, as some don't support video. When connected to a computer, check display settings for a multiple display option like 'mirror these displays'. Also, confirm your source device supports HDMI or USB-C video output.
Why is the image blurry on my Miroir M600 Projector?
If the image on your Miroir Projector is blurry, try the following: Adjust the focus by rolling the focus wheel forwards or backwards. Ensure the projection surface is smooth and non-reflective. Check the projector's lens to make sure it is clean and free of any debris.
Visual guide to projector ports and device connection options for initial setup.
Contact information for text support and URL for downloading the full manual.
Detailed identification and function of each labeled projector component (A-N).
Solutions for blurry or non-square projected images.
Troubleshooting steps for no sound, no signal, and connection problems.
Guidance for projector not powering on or staying on.
To Next Page
General
