Battery Indicator Lights – Lights flash in turn as the device charges. The battery is fully charged when all the
lights illuminate and no longer flash.
Projection Lens – Turns power on.
Audio Out (3.5mm) – (Optional) Connect an external speaker or headphones.
HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
USB Power Output – Connect a USB power cable to provide power to a HDMI streaming stick or to charge a
smartphone battery. Cannot be used for video input.
USB-C Video/Charge Input – Connect any compatible USB-C charge/ video cable to a device that supports
USB-C video output, or power adapter that supports charging. (not included)
Reset Button – Press to reset projector.
Power Port – Connect included AC Adapter/Charger for power. Fully charge battery before the first use
(approx. 4-5 hours).
Mode Button – Press mode button to change from HDMI to USB–C video.
Controls – Increase/decrease the volume output of the projector.
Press +/- together to change from ECO to Normal mode.
Normal mode is maximum brightness but shorter battery life.
Focus Controls – Turn wheel to adjust focus.
Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
To Next Page
Loading...
