INSTALLATION
VERSIONS ÉTAPES PHOTOS
Table Top (without base)
without external draining
• Install the tray on the cooler by
presenting it upright. Push it until it
clicks into place.
Table Top (without base)
with external draining
(option)
• Once the fountain is placed, re-
move the cap from the drain outlet
of the drip tray.
• Install the tray on the cooler by
presenting it upright. Push it until it
clicks into place.
• Connect the white draining pipe
located at the back of the fountain
to the mains.
On base model
without external draining
• Once the fountain is placed, re-
move the cap from the drain outlet
of the drip tray and the 2 foot.
• Install the tray on the cooler by
presenting it upright. Push it until it
clicks into place.
• Open the base.
• Connect the white draining pipe to
the pipe connected to the collec-
tion can.
On base model
with external draining
(option)
• Once the fountain is placed, re-
move the cap from the drain outlet
of the drip tray and the 2 foot.
• Install the tray on the cooler by
presenting it upright. Push it until it
clicks into place.
• Open the base and pull gently
on the white draining pipe until it
pops out completely.
• Pass it througt the back partition
and connect it to the mains for
optimal flow.
To Next Page
Loading...
