Mistral MAF2X4W - Page 19

19
FAQs and Troubleshooting Guide
NOTE: Do not aempt to repair an electrical appliance yourself!
If the Air Fryer does not work properly, rst check whether you are able to rectify the problem yourself. If the
problem can not be solved with the following steps, contact the customer service department.
Problem Possible Cause Solution
The Air Fryer does not work. The
displays on the control panel do
not switch on.
The mains plug is not
inserted correctly in the plug
socket.
Push the mains plug into the
plug socket as far as it will go.
The plug socket is defective. Try another plug socket.
No mains voltage is present. Check the fuse of the
electrical distributor (fuse
box).
The overheating protection has
been triggered.
Pull the mains plug out of
the plug socket and allow
the Air Fryer to cool down
completely. Then try again.
If the Air Fryer still can not
be switched on, contact
the customer service
department.
The fuse in the electrical distributor
(fuse box) is triggered.
Too many appliances
connected to the same circuit.
Reduce the number of
appliances in the circuit.
The food has not
been cooked evenly.
Dierent items of food with
dierent cooking times have
been prepared at the same
time.
Place food with a longer
cooking time in the Air Fryer
rst, then add ingredients
with a shorter cooking time
later.
Items of food which require
dierent cooking temperatures
have been prepared at
the same time.
Prepare items of food with
dierent cooking
temperatures one after the
other.
The set cooking time was too
short or the temperature too
low.
Increase the cooking time or
temperature.
There are too much ingredients
in the baskets.
Reduce the amount of food.
The items of food are piled on
top of one another.
Spread the food and mix it