EasyManua.ls Logo

Mistral MEM815 - Troubleshooting; Common Problems and Solutions; Specification; Technical Specifications

Mistral MEM815
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Trouble shooting
Problem Possible cause Solution
Water is leaking from the
bottom of the machine
Too much water in the drip tray Clean out the drip tray
Water is leaking from the outer
side of the lter
There is some ground coffee on
edge of lter
Clean it off
Tainted taste to the coffee Allowing water to sit too long,
improper cleaning
Clean and de-scale
Low or no steam from the
steam wand
Steam wand is clogged up Clean and de-scale
Poor milk frothing Using skimmed milk Full cream milk is best
Specication:
Supply voltage:….........................…220-240v~ 50Hz
Power consumption:….................................…850W
Protection Class: ….............................................…..I
Water Tank Capacity:…......................................1.2L
Note: As a result of continual improvements, the design and specications of the
product within may differ slightly to the unit illustrated from the packaging.