This document is an instruction manual for the Mistral Coffee Capsule Machine, Model MEM700. It is designed for cooking with convenience and is suitable for use with Nespresso® or equivalent Coffee Capsules.
Function Description
The Mistral Coffee Capsule Machine, Model MEM700, is an appliance designed to brew coffee from Nespresso® or equivalent coffee capsules. It features a water tank, a handle for inserting capsules, a capsule holder, a small cup coffee button, a large cup coffee button (both with indicators), a cup holder grid, a drip tray, a capsule collection tray, a power switch, and a coffee outlet. The machine is intended for household use only and is not suitable for industrial or commercial applications.
To operate the machine, users fill the detachable water tank with cold water, ensuring it does not exceed the "MAX" level. A Nespresso® or equivalent coffee capsule is then inserted into the capsule holder by lifting and pushing down the handle. After plugging in the machine and turning on the ON/OFF switch, the indicators for both large and small cup coffee buttons will flash, then light steadily, indicating it's ready for brewing. Users can select either the large or small cup button to start the brewing process. Coffee will flow from the coffee outlet into a cup placed on the cup holder grid. The machine automatically stops brewing once the desired quantity is reached. During brewing, if there is a lack of water, the indicators will flash quickly, prompting the user to refill the water tank after turning off the power switch. After brewing, the used capsule is automatically expelled into the capsule collection tray by opening the handle. The machine will enter standby mode after 4 minutes of inactivity, with the indicator lights turning off; pressing any button will reactivate it. The small cup coffee quantity is pre-programmed to approximately 45ml, while the large cup quantity is approximately 75ml. The brewing process can be interrupted by pressing the selected coffee button once and resumed by pressing it again.
Important Technical Specifications
- Model: MEM700
- Suitability: Nespresso® or equivalent Coffee Capsules only.
- Power Supply: 220-240V ~50Hz
- Power Consumption: 960-1145W
- Pre-programmed Coffee Quantities:
- Small cup: Approximately 45ml
- Large cup: Approximately 75ml
- Standby Mode: Enters standby after 4 minutes of no operation.
- Safety Features: Designed with basic safety precautions to reduce the risk of fire, electric shock, and injury. Includes warnings against immersing the main unit, plug, or cord in water, and operating with a damaged power cord or plug.
- Materials: Parts like the water tank, drip tray, capsule collection tray, and cup holder grid are not dishwasher safe.
Usage Features
- Ease of Use: Simple operation with clearly marked buttons for small and large coffee cups.
- Automatic Stop: Coffee flow stops automatically once the pre-programmed quantity is reached.
- Water Level Indication: Indicators flash quickly when water is low, prompting refill.
- Capsule Ejection: Used capsules are automatically expelled into a collection tray for convenience.
- Quick Start: The machine is ready for brewing once the indicator lights become steady.
- Brewing Interruption: The brewing process can be paused and resumed as needed.
- Compact Design: Features a water tank lid, handle, capsule holder, cup holder grid, drip tray, capsule collection tray, power switch, and coffee outlet, all integrated into a compact unit.
- Safety Precautions: Emphasizes not touching hot surfaces, not operating near flammable materials, and not inserting fingers into the capsule holder. It also warns against opening the handle during brewing due to extremely hot water.
- Temperature Requirement: Should not be placed in rooms where the temperature is below 0 °C to prevent damage from freezing residual water.
Maintenance Features
- Cleaning:
- The water tank, drip tray, capsule collection tray, and cup holder grid should be washed in warm soapy water and dried thoroughly. These parts are not dishwasher safe.
- The outside of the unit can be cleaned with a damp cloth.
- Abrasive cleaners, scouring pads, or oven cleaners should not be used.
- The main unit, plug, and cord should never be immersed in water.
- The drip tray can be removed by pulling it outwards directly.
- Always allow the appliance to cool completely before cleaning.
- Mineral Deposit Removal (Descaling):
- Regular descaling is recommended based on water quality and frequency of use.
- The process involves filling the water tank with water and a descaler (or citric acid solution, 100 parts water to 3 parts citric acid) to the MAX level.
- After turning on the machine and waiting for indicators to light steadily, a container is placed on the cup holder grid.
- The large or small cup coffee button is pressed to allow the descaling solution to flow through.
- After 20 minutes, the button is pressed again until all the solution is used up.
- The tank is then rinsed and refilled with clean water, and the process is repeated until all clean water is used to flush the system.
- Storage: Store the unit indoors in a dry location.
- Disconnection: Always turn off the coffee maker and disconnect the power supply when not in use.
- Troubleshooting: The manual provides a troubleshooting guide for common issues such as indicator light not illuminating, strange noises, no coffee coming out, water at the bottom of the machine, capsule not fitting, capsule not falling down, a hiss after coffee release, and flashing indicators due to lack of water. Solutions include checking the plug, water tank position, capsule insertion, and refilling the water tank.
To Next Page
Need help?
General
