EasyManua.ls Logo

Mistral MEM700 - Care and Cleaning

Mistral MEM700
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
NOTE: The appliance will enter into
to standby mode after 4 minutes
without operation and Large cup/Small
coee cup indicator lights will stop
illuminating, pressing of the buons will
reactivate operation.
NOTE: Coee quantity of Small cup is
pre-programmed to approximately 45ml
while the coee quantity of Large cup is
programmed to approximately 75ml.
NOTE: During brewing process, you can
interrupt the coee brewing process by
pressing your selected coee buon
once. To continue it, just need to press
the buon again.
6. During brewing process, both the indicators of
Large cup & Small cup coee buons will
flash quickly if there is lack of water in the
water tank. At that time, you must rell the
water tank. Before rell, rst press the Power
switch to “OFF” position and then remove the
water tank to rell. After rell, replace the
water tank and make sure that it is placed
in position. Then you can continue to brew
coee.
7. Once you have nished brewing coee,
always expel the capsule. Capsules are
automatically expelled into the capsule
collection tray by opening the handle.
CAUTION: Never open the handle during
brewing cycles.
8. If you want another cup, insert a new capsule
before operating.
9. Empty the capsule collection tray and rinse
the unit and tank frequently.
10. Always turn the coee maker o and
disconnect the power supply when not use.
This machine is only suitable with
Nespresso® or equivalent Coee
Capsules – do not use other coee
capsules*
Care and Cleaning
1. Switch o and unplug the Coee Capsule
Machine from the power outlet.
2. Allow the appliance to cool completely.
3. Wash the water tank, drip tray, capsule
collection tray and cup holder grid in warm
soapy water and dry thoroughly. These parts
are not dishwasher safe.
4. Use a damp cloth to clean the outside of the
unit and dry thoroughly.
5. Replace all parts and keep for next use.
Warning: Do not use abrasive cleaners or
scouring pads. Do not immerse the main
unit, plug and cord in water.
Note: To remove the drip tray, pull it
outwards directly.
*Nespresso® is a registered trade mark of Societe de Produits Nestle S.A. (Nestle)
This product has no sponsorship, approval, or ailiation with Nestle or its products.

Related product manuals