Mistral MSS25 - Performance Specifications (Continued); Additional Model Performance Parameters

To Next Page

To Previous Page

Performance Parameters (cont.)

Model

MSS20 - 2HP

indoor outdoor

Function heat pump type

Power 220-240V~, 50Hz

Rated cooling/heating capacity (W) 5100(cool)/5700(heat)

Standard input power (W) 1960(cool)/2000(heat)

Standard input current (A) 9.0(cool)/9.2(heat)

Air ow volume (m³/h) 750

Dehumidifying capacity (L/h) 2.5

Protection I

Water-proof IP20 IP24

Climate type T1

Refrigerant (R22) charge amount (g) 1650

Noise dB (A) 43 55

Net weight (Kg) 12 46

Dimension (mm) WxHxD 1020x180x315 800x300x685

NOTE 1. The indicated noise value is from laboratory tests done before leaving the factory.

2. The rated cooling capacity and rated heating capacity value is tested under following conditions.

cooling operation indoor 27˚C (DB) 19˚C (WB) outdoor 35˚C (DB) 24˚C (WB)

heating operation indoor 20˚C (DB) 15˚C (WB) outdoor 7˚C (DB) 6˚C (DB)

3. All of the above information may be changed without notice. These are the latest and

accurate specications on the name plate of your air conditioner.

4. Working temperature range:

Maximum cooling Minimum cooling Maximum cooling Minimum cooling

Indoor side (DB/WB (˚C) 32/23 21/15 27/-- 20/--

Outdoor side DB/WB (˚C) 43/26 21/15 24/18 -5/-6

5. If air conditioner working voltage exceeds 230V±10% it may operate abnormally.

6. Wiring diagrams of air conditioner (indoor unit/outdoor unit) are attached to the unit.

7. If the power cable or connecting cable is damaged, it must be replaced by its service agent

or similar qualied person in order to avoid a hazard.

12 13

Performance Parameters (cont.)

Model

MSS25 - 2.5HP

indoor outdoor

Function heat pump type

Power 230V~, 50Hz

Rated cooling/heating capacity (W) 6800(cool)/7500(heat)

Standard input power (W) 2500(cool)/2590(heat)

Standard input current (A) 12.1(cool)/12.6(heat)

Air ow volume (m³/h) 1100

Dehumidifying capacity (L/h) 3.3