EasyManua.ls Logo

Mitchell MIT6501 - Instrument Overview and Features

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-2-
g. Rated environmental conditions :
(1) Indoor use.
(2) Installation Category
.
(3) Pollution Degree 2.
(4) Altitude up to 2000 meters.
(5) Relative humidity 80% max.
(6) Ambient temperature 0ºC~40ºC.
h. Observe the international Electrical Symbols listed below :
Meter is protected throughout by double insulation or
reinforced insulation.
Warning ! Risk of electric shock.
Caution ! Refer to this manual before using the meter.
Earth
2. Overview
This is a 5kV high voltage insulation tester which has output
voltages of 500V, 1000V, 2500V, 5000V.
The top line of the display shows the elapsed time at the start
of the test. Digital readout of the total time will remain displayed
even after testing has ceased.
This instrument displays a voltage warning and sounds when AC
or DC is present before injecting the test voltage.