To Next PageTo Next Page
Need help?Do you have a question about the MITECH SUPER200P and is the answer not in the manual?
General| Welding Method | MMA (Manual Metal Arc) |
|---|---|
| Input Voltage | AC 220V ±15% |
| Frequency | 50/60Hz |
| Rated Input Current | 32A |
| Output Current Range | 20-200A |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Insulation Grade | F |
| Protection Grade | IP21S |
| Weight | 9 kg |
| Duty Cycle | 60% |
Troubleshooting arc-striking issues and pauses during CUT operation.
Diagnosing and resolving issues related to fast electrode or tip consumption.
Addressing problems with arc penetration and excessive slag during cutting.
Troubleshooting black welding spots caused by poor oxygen protection.
Specifies environmental conditions for optimal machine performance.
Highlights critical safety precautions for using the welding machine.
Warning about electric shock risks and proper grounding procedures.
Guidance on avoiding harmful smoke inhalation during welding.
Instructions on protecting eyes and skin from arc radiation.
Precautions against fire risks from welding sparks.
Recommendations for hearing protection against excessive noise.
Guidance on seeking professional help for operational issues.
Identifies and describes controls and indicators on the SUPER200P panel.
Identifies and describes controls and indicators on the SUPER200 panel.
Lists and identifies key components of the welding machine.
Details on ventilation, gas source connection, and grounding.
