Mitel 5634 User Manual (English)

Other manuals for Mitel 5634

Questions and Answers:

S
Susan GilbertAug 13, 2025
Why is there no ring signal on my Mitel Handset?
- S
  shelly74Aug 14, 2025
  There are two possible reasons why you aren't hearing a ring signal on your Mitel Handset: * The handset might be muted. If the Silent off icon is visible in the Status bar, press and hold the Sound off key or the Mute button in idle mode to unmute the handset. * The ring volume may be set to silent. If you see the Silent volume icon in the Status bar, increase the volume by pressing the Volume up button or by navigating to Settings ? Sound & Alerts ? Volume.
M
Mitchell LewisAug 17, 2025
What to do if my Mitel Handset says 'No channel available'?
- S
  Shelley DuncanAug 17, 2025
  The 'No channel available' message on your Mitel Handset indicates that the handset didn't receive the expected response from the PBX during call setup, or you're trying to make a call while the handset is displaying 'Messaging only'. Try making the call again when the handset is not showing 'Messaging only'. If it still doesn't work, contact the system administrator.
L
Lisa MorrisAug 21, 2025
What to do if I cannot use my Mitel Handset and it says locked?
- L
  Lauren DudleyAug 21, 2025
  If your Mitel Handset is locked, it means the phone lock feature is activated. To unlock it, enter the required PIN code. If you've lost the PIN code, contact your system administrator for assistance.
K
Keith RobertsonAug 25, 2025
Why can't I mute my Mitel Handset or set the ring volume to silent?
- M
  Michael Best MDAug 25, 2025
  If you are unable to mute your Mitel Handset or set the ring volume to silent, it's likely because the handset is configured to prevent you from doing so. Contact your system administrator and ask them to turn off the 'Prevent silent' parameter to remove these sound restrictions.
C
Christina CookAug 29, 2025
What to do if the Mitel Handset display stays dark?
- C
  Christina VasquezAug 29, 2025
  If the display on your Mitel Handset is dark, it could be due to one of two reasons: 1. The battery level is empty. Charge or replace the battery. 2. Power save mode is enabled. To resolve this, go to the Settings menu ? Display ? Brightness and select Normal.
A
Anthony JohnsonSep 1, 2025
How to fix wrong time and date setting on Mitel Handset?
- L
  Lisa ArellanoSep 1, 2025
  If the time and date are incorrect on your Mitel Handset, it's likely because the handset hasn't received the correct information from the PBX after a system change. You can try the following: * Switch the handset off and on again. * Wait up to 24 hours for the changes to appear. * If the time and date are still wrong after this, contact your system administrator.
M
Mary PatelSep 5, 2025
Why is it not possible to switch off my Mitel Handset?
- V
  Vincent GreerSep 5, 2025
  If you cannot switch off your Mitel Handset, it is most likely because the handset is configured to restrict you from doing so. Contact your system administrator for support and ask them to turn off the 'Block switch off' parameter to remove this restriction.
D
Debra BaileySep 9, 2025
Why are there no entries in the call list on my Mitel Handset?
- K
  Katherine SmithSep 9, 2025
  If the call list on your Mitel Handset is empty, it's likely because the handset is configured to prevent calls from being saved. Contact your system administrator and ask them to turn on the 'Call list' parameter so that outgoing and incoming calls are stored.

Mitel 5634 Specifications

General

Connectivity	DECT
Loudspeaker function	Yes
Vibration	Yes
Central directory	Yes
Local phonebook	Yes
Speed Dial	Yes
DECT standard	DECT 6.0
Compatibility	Mitel platforms

Related product manuals

Mitel 5624

95 pages

Mitel 5634 Quick Reference Guide

Table of Contents

Other manuals for Mitel 5634

Questions and Answers:

Mitel 5634 Specifications

Related product manuals