The Mitel Unit Quick Start
Using IPv4 to Connect the Mitel Unit to a Network without a DHCP
Prerequisite
• Your computer must be set to use the 192.168.0.11 private IP address.
• Make sure that your network connection is working.
1. Wear an ESD wrist strap, ensuring it makes good contact with your bare skin.
2. Attach the ESD wrist strap end to an earth ground (unpainted bare metal spot of a grounded
equipment rack).
3. Make sure the circuit breakers of AC power sources used to power the Mitel unit are OFF.
4. Make sure the provided external Power Adaptor is connected to the DC connector of the Mitel
unit and in an appropriate AC electrical outlet.
5. Connect a 10/100 BaseT Ethernet RJ-45 cable into the ETH2 Ethernet connector of the Mitel unit.
6. Connect the other end of the cable into your PC.
7. Validate the installation.
8. Turn ON the AC power sources that are used to power the Mitel unit at the circuit breaker.
NOTE: When the unit is brought from a cold to a warm environment, condensation, that might be
harmful to the unit, may occur. If this is the case, wait one hour before connecting the power cord.
Result: You can now use the 192.168.0.10 IP address to access your unit's management interface.
Logging On to the Mitel Unit Web Interface
For better performances, it is recommended to use the latest available version of Microsoft Internet
Explorer, Google Chrome or Mozilla Firefox.
NOTE: You may not be able to log on to the Management Interface if you are using older versions.
The computer's network card must be on the same subnet as the Mitel unit.
1. In your web browser, enter the IP address used by your Mitel unit to communicate with the
Management Interface.
• If your computer is connected to the Ethernet port, commonly used to be connected to the
Local Area Network (LAN), i.e. Eth2 on most devices, use the 192.168.0.10 IP address.
• If your Mitel unit is configured to use a DHCP with IPv4, use the DHCP- provided IP address.
2. Enter public as your username and leave the password field empty.
NOTE: The public username account has administrator rights.
To Next Page
Loading...
Need help?
General
