Storage & Transportation Temp -30℃ ~ 60℃ (-22°F ~ 140°F)
Storage & Transportation Humidity 10% ~ 95%RH
Storage & Transportation Pressure 500 ~ 1060 hPa
Keep the device away from sunlight and store the device in a dry
location (e.g. away from windows, sinks, bathtubs, kitchens, and
bathrooms) at around room temperature after each use.
Gently clean the product before each use and keep the
product off.
First wipe the helmet surfaces with a clean cloth lightly
dampened with clean water. Inspect the surfaces thoroughly
for any remaining visible contaminants, and repeat wiping if
necessary until no visible contaminants remain.
Allow to air dry. Then wipe the helmet surfaces with a clean
cloth dampened with 70% ethanol or 70% isopropyl alcohol.
Allow contact time of 1 minute and then allow to air dry.
Do not use the device unless it is completely dry.
If the product is not used for a long time, pay attention to
moisture and dust: power on once every 3 months and
charge once every 6 months to avoid moisture aging and
damage of internal components.
Warning: If the product is taken out of the highest or
lowest storage environment and placed in a room
temperature environment it can be used normally only
after standing for at least 1 hour.
23
Cleaning and storage
To Next Page
Loading...