Mitox 26L-SP User Manual

Operator’s Manual
user manual, maintenance instructions and spare parts
26L-SP Special Edition Brushcutter
www.mitox.co.uk
Read this manual carefully before operating the machine
Original Instructions Version August 15

Mitox 26L-SP Specifications

General

Brand	Mitox
Model	26L-SP
Category	Brush Cutter
Language	English

Summary

PRODUCT DESCRIPTION

Component Location

Lists and describes the various components of the brushcutter for identification purposes.

Warnings in the Manual

Understanding Warning Symbols

Explains the meaning of warning, important, and note symbols used in the manual.

Safety Symbols

Interpreting Safety Symbols

Details various safety symbols and their meanings for safe operation.

Taking Care of Warning Labels

Maintaining Warning Labels

Instructions on how to keep warning labels clean, free from scratches, and replace damaged ones.

Symbols on the Machine

Fuel Tank and Choke Symbols

Explains symbols indicating fuel tank and choke operation modes on the machine.

Safety Precautions

General Safety Guidelines

Provides essential precautions for safe operation, including user responsibility and conditions.

Work Clothing and Safety Equipment

Required Protective Gear

Details the necessary work clothing and protective equipment for safe use.

Safe Handling of Fuel

Fuel Flammability and Storage

Advises on safe practices for handling, storing, and refuelling flammable fuel.

Before Operating the Brushcutter

Pre-Operation Checks

Covers checks for the work area, machine components, and operator readiness before starting.

Before Starting the Engine

Ensures the work area is clear and the machine is properly positioned before starting the engine.

Avoid Noise Problems

Operating Hours and Noise Regulations

Provides guidance on local regulations for sound levels and recommended operating hours.

Safety During Brushcutter Operation

Proper Operating Posture and Techniques

Details on maintaining posture, grip, and safe practices during cutting operations.

Electrical and Heat Hazard Warnings

Warns about electrical shock from spark plug and burns from hot engine parts.

Transport and Storage Safety

Ensures safe transport by disabling the engine, securing the machine, and pointing the cutting head correctly.

Two-Stroke Fuel

Fuel Mixture Recommendations

Details the recommended petrol and oil mixture ratio for the two-stroke engine.

Oil Type and Engine Compatibility

Specifies suitable oil types for two-stroke engines and warns against using 4-cycle oils.

Ethanol Protection

Recommends additives to protect the engine from the effects of ethanol in petrol.

Fuel Storage Guidelines

Mixed Fuel Storage and Deterioration

Explains how mixed fuel degrades over time and affects the carburettor and engine.

Storing the Brushcutter for Extended Periods

Provides instructions for storing the brushcutter when not in use for over a month.

Fuelling the Brushcutter

Fuel Mixing and Tank Filling

Details the process of mixing fuel, cleaning the cap area, and filling the fuel tank.

Refuelling Safety Precautions

Emphasizes safety measures like stopping the engine and checking for sparks before refuelling.

Assembly of the Brushcutter

Installing the Guard

Step-by-step instructions for attaching the protective guard to the brushcutter.

Installing the Brushcutter Attachment

Connecting the Drive Shaft and Attachment

Instructions for connecting the attachment shaft to the main unit using locking pins and clamps.

Using the Brushcutter

Choosing the Cutting Device

Guidance on selecting the appropriate cutting device for different types of vegetation.

3-Point Blade Usage

Instructions on how to use the 3-point blade for cutting brushwood and small shrubs.

Nylon Head Usage

Guidance on using the nylon head for grass trimming and line feeding.

Installing the Nylon Head

Nylon Head Attachment Procedure

Step-by-step guide to securely attach the nylon head to the gearbox shaft.

Installing the 3 Point Blade

3-Point Blade Attachment Procedure

Instructions for correctly positioning and securing the 3-point blade onto the brushcutter.

Installing the Loop Handle Assembly

Loop Handle Attachment and Adjustment

Guide to fixing the loop handle to the shaft and adjusting it for comfortable use.

Operation

Starting the Engine Safely

Provides caution for starting the engine and highlights potential damage to the starter mechanism.

Cold Engine Starting Procedure

Step-by-step guide for starting a cold engine, including choke and throttle usage.

Hot Engine Starting Procedure

Instructions for starting the engine when it is already warm, including fuel line checks.

Overchoking Troubleshooting

Guidance on what to do if the engine becomes flooded due to overchoking.

Stopping the Engine Safely

Details the correct procedure for stopping the engine and troubleshooting if it fails to stop.

Running In

Engine Break-in Period

Advises on operating the engine at reduced speed during the first ten hours for proper bedding.

Transportation Safety

Safe Transport Practices

Ensures safe transport by disabling the engine, securing the machine, and pointing the cutting head correctly.

Maintenance

Regular Checks and Tightening

Recommends checking and tightening nuts, bolts, and screws after every use for safety and function.

Fuel Filter Maintenance

Details the procedure for cleaning or replacing the fuel filter every 15 hours of operation.

Spark Plug Maintenance

Spark Plug Cleaning and Gap Adjustment

Explains how to clean, reset the gap, or replace the spark plug for optimal engine performance.

Air Filter Maintenance

Air Filter Cleaning and Replacement

Details how to clean or replace the air filter to maintain engine performance.

Carburettor Adjustment

Idle Speed Adjustment

Instructions for adjusting the carburettor's idle speed to stop the cutting head movement.

Safety Lock Function

Operation of the Safety Lock

Explains how the safety lock prevents accidental throttle lever engagement.

Storage Procedures

Engine Storage Preparation

Details steps like oiling the cylinder and removing fuel for long-term storage.

Gear Case Maintenance

Gearbox Lubrication

Instructions for greasing the gearbox using Lithium grease every 15 hours of use.

Replacing the Nylon Cord

Nylon Head Cord Replacement

Step-by-step guide for opening the nylon head, winding new cord, and reassembling.

Troubleshooting Engine Issues

Engine Won't Start or Loses Power

Lists common causes and solutions for engine starting problems and power loss.

Service Schedule

Scheduled Maintenance Tasks

Outlines a schedule for various maintenance tasks based on operating hours.

Specifications

Model and Engine Specifications

Lists technical specifications for the 26L-SP Brushcutter, including engine type, power, and dimensions.

Performance and Noise Specifications

Details engine speed, cutting diameter, line diameter, and noise levels.

Parts Diagram - Engine

Engine Component Identification

Diagram showing numbered engine components for easy identification.

Parts List - Engine

Engine Part Numbers and Descriptions

Provides a list of engine components with their corresponding part numbers and descriptions.

Parts List - Engine (Continued)

Engine Part Numbers and Descriptions (Cont.)

Continues the list of engine components with their part numbers and descriptions.

Parts List - Engine (Continued)

Engine Part Numbers and Descriptions (Cont.)

Continues the list of engine components with their part numbers and descriptions.

Parts List - Engine (Continued)

Engine Part Numbers and Descriptions (Cont.)

Continues the list of engine components with their part numbers and descriptions.

Parts Diagram - Shaft

Shaft Component Identification

Diagram showing numbered shaft components for easy identification.

Parts List - Shaft

Shaft Part Numbers and Descriptions

Provides a list of shaft components with their corresponding part numbers and descriptions.

Parts List - Shaft (Continued)

Shaft Part Numbers and Descriptions (Cont.)

Continues the list of shaft components with their part numbers and descriptions.

Parts List - Shaft (Continued)

Shaft Part Numbers and Descriptions (Cont.)

Continues the list of shaft components with their part numbers and descriptions.

Conditions of Warranty

Warranty Coverage Details

Details the warranty period, application, and limitations for product defects.

Exclusions from Warranty

Lists conditions and parts that are not covered by the product warranty.

Ordering Spare Parts

Provides instructions on how to order spare parts and the necessity of retaining the purchase receipt.