Need help?Do you have a question about the Mitox 331 and is the answer not in the manual?
Provides an overview and general advice for safe operation of the brush cutter.
Details essential protective gear and clothing required for safe brush cutter operation.
Steps to attach the safety guard to the brush cutter for operator protection.
Instructions for fitting the nylon cutting head assembly onto the brush cutter.
Procedure for mounting the 3-tooth cutting blade onto the brush cutter.
Guide for attaching and adjusting the U-shaped handle for optimal user comfort.
Steps to attach and position the loop-style handle for comfortable operation.
Guidance on selecting the appropriate cutting tool (blade or line) for the task.
Specific instructions for operating the brush cutter with the nylon line cutting head.
Guidelines for using the brush cutter with the 3-point cutting blade for tougher vegetation.
Procedures for safely storing, mixing, and refueling the brush cutter with two-stroke fuel.
Pre-operation checks and work area preparation for safe brush cutter use.
Steps to ensure safe engine startup, including area checks and initial operation.
Instructions for starting the brush cutter engine, including cold and hot starts.
Procedure for starting a cold brush cutter engine using choke and starter.
Procedure for starting a warm or hot brush cutter engine.
Guidance on how to correct an engine flooded due to over-choking.
Steps to safely shut down the brush cutter engine using the ignition switch.
Break-in procedure for new engines to ensure proper performance and longevity.
How to inspect, clean, or replace the fuel filter for optimal engine performance.
Maintenance steps for the spark plug, including cleaning, gapping, and replacement.
Instructions for checking, cleaning, or replacing the air filter to maintain engine performance.
Instructions on maintaining the legibility and condition of warning labels on the machine.
Details the meaning of symbols physically present on the brush cutter machine itself.
General| Engine Type | 2-Stroke |
|---|---|
| Engine Displacement | 32.6cc |
| Power Output | 0.9kW |
| Power | 1.2hp |
| Fuel Tank Capacity | 0.9 liters |
| Weight | 7.1kg |
| Cutting Width | 25.5cm |
To Next Page
