Mitox 26L-SP - Component Location; Warnings in the Manual; Understanding Warning Symbols

26L-SP Special Edition
3
Original Instructions Version August 15
Warnings in the Manual
This mark indicates instructions which must be followed in order to prevent accidents which could
lead to serious bodily injury or death.
This mark indicates instructions which must be followed or it leads to mechanical failure,
breakdown, or damage.
This mark indicates hints or useful directions in the use of the product.
IMPORTANT
!
NOTE
Component Location
1 BLDE 3 Point blade for grass, weed or brush cutting applications.
2 DRIVE SHFT Contains the drive shaft.
3 THROTTLE TRIGGER Spring loaded to return to idle when released.
4 IGNITION SWITCH Slide switch, forward to run, back to stop.
5 SFETY LEVER Prevents accidental operation of the throttle.
6 HNDLE This handle can be adjusted for maximum comfort
7 HRNESS SSEMBLY Fully adjustable for maximum comfort
8 PETROL CP
9 PURGE BULB Push the purge bulb to remove the air from the fuel system.
10 FUEL TNK Contains fuel and fuel filter
11 IR FILTER COVERt Contains replaceable filter
12 CHOKE To help in cold starting
13 STRTER HNDLE Pull to start the engine
14 DEBRIS SHIELD Helps protect the operator from debris
15 CUT-OFF KNIFE Cuts the nylon line to the correct length
16 NYLON CUTTER HED Contains replaceable nylon trimming line
17 GERBOX For attaching a blade or nylon head to
18 RER HNDLE Incorporating throttle trigger, switch, and safety lever
19 COUPLING Joins the power unit to the brushcutter attachment