■ EXPLANATION OF SYMBOLS ON THE MACHINE
For safe operation and maintenance, symbols are carved in relief on the machine:
FUEL TANK
Fuel tank 2 stroke mix
Position: Fuel cap
CHAIN OIL
Chain oil tank
Position: oil cap
IGNITION SWITCH
Setting the switch to the “O” position, the engine stops immediately.
Position: Left of the rear handle.
CHOKE OPERATION
Starting mode when the engine is hot. (choke off)
Position: Air cleaner cover.
Starting mode when the engine is cold. (choke on)
Position: Air cleaner cover.
CARBURETOR ADJUSTMENTS
The screw under the “H” stamp is High-speed adjustment screw.
Position: Left side of top cover
The screw under the “L” stamp is Slow-speed adjustment screw.
Position: Left side of top cover
The screw the “T” stamp is Idle adjustment screw.
Position: Left side of top cover
CHAIN BRAKE OPERATION
Shows the directions that the chain brake is Released (white arrow) and
Activated (black arrow).
Position: Front of chain brake cover
To Next Page
Loading...
