10
IMPORTANT
• After every use, check that all nuts bolts and screws are securely fastened and tighten if
necessary.
REAR HANDLE FITTED TO THE 6000HTDX
• To reduce fatigue when trimming hedges, the handle can be swivelled through 90° to the left or
right.
Do not use the throttle during this operation!
Proceed as follows:
• Free the handle by pressing the locking lever 2 Fig 4.
• Turn the handle 1 Fig 4 until the locking lever clicks into place.
• When the handle is locked in its new position, you can apply the throttle again.
2
2
1 1
Fig 4, (1) handle (2) locking lever
TRANSPORTATION
When transporting or storing the machine always fit the blade guard.
To Next Page
Loading...
