8
OPERATION
• Keep clear of the blades as they may start moving when engine starts.
STARTING THE ENGINE.
• CAUTION do not pull the starter cord all the way out and do not let go of the starter
handle when the cord is extended, this can damage the starter mechanism.
COLD ENGINE STARTING
• Rest the unit on a flat, firm surface. Keep the blades off the ground and clear of surrounding
objects as they may start moving upon starting of the engine.
• Push the air purge bulb a Fig 1 until fuel is visible in the clear return fuel line.
Fig 1, (a)
air purge bulb
(b) clear tube
Move the choke lever to the closed position "c" Fig 2.
Fig 2, (e) choke lever, (d) open (c) closed
Set the ignition switch to the start position "I'' (RUN) Fig 3.
Fig 3,
To Next Page
Loading...
