To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric American Standart NAXWST06A 112A Series and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | American Standart NAXWST06A 112A Series |
| Category | Air Conditioner |
| Language | English |
Explains warning symbols and cautionary marks used in the manual for safe operation.
Details the meaning of symbols indicating actions to do or not to do.
Covers crucial safety precautions related to the installation process.
Provides guidance on immediate actions for abnormal unit behavior.
Identifies and labels all components of the indoor unit, outdoor unit, and remote controller.
Instructions for installing the holder for the remote controller.
Step-by-step guide for inserting batteries into the remote control.
Instructions on how to set the clock on the remote controller.
Procedure to switch between Fahrenheit (°F) and Celsius (°C) temperature displays.
Explains the status indicated by the operational lamp on the indoor unit.
How to operate the unit using the emergency switch on the indoor unit.
Describes the unit's ability to resume operation after a power interruption.
Guide to selecting desired fan speed for optimal comfort and efficiency.
Instructions for setting the vane position for desired air circulation.
Illustrative uses of the Smart Set function for personalized settings.
Explanation of the Econo Cool mode for energy-saving cooling.
Instructions for scheduling the unit's ON and OFF times.
Procedures for cleaning the Nano Platinum and Air Cleaning filters.
Instructions for cleaning the front panel of the indoor unit.
Common problems and solutions for the indoor unit.
Common problems and solutions for the outdoor unit.
Addresses issues related to the remote control and air movement.
Explains common sounds and smells and their potential causes.
Steps to prepare the unit for extended periods of non-use.
Guidance on selecting optimal and avoiding unsuitable installation locations.
Requirements for dedicated power circuits and proper grounding.
Details the operational temperature limits for cooling and heating modes.
