To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric City Multi PLFY Series and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | City Multi PLFY Series |
| Category | Air Conditioner |
| Language | English |
General safety instructions for installation and electrical work.
Specific safety guidelines for units involving water.
Identifies components and functions of the indoor unit.
Details functions and compatibility of wired remote controllers.
Technical data and parameters for the indoor units.
Specifications for electrical components used in the units.
Noise levels measured for the indoor units.
Graphs showing sound pressure levels across frequency bands.
Details on fresh air intake location and characteristics.
How to operate the unit with an external duct fan.
Procedures for setting and fixing horizontal vanes.
How to operate the unit in cooling mode.
How to operate the unit in drying mode.
How to operate the unit in fan-only mode.
How to operate the unit in heating mode.
Automatic switching between cooling and heating.
Operations when the unit is stopped.
Procedures for checking individual components for faults.
Explanation of DIP switch functions and settings.
Diagram showing test points on the indoor controller board.
Steps to remove the air intake grille and filter.
Steps to remove the main panel and corner panels.
Steps to remove electrical components from the control box.
Steps to remove temperature thermistors.
Steps to remove the drain pan.
Steps to remove the fan motor and turbo fan.
Steps to remove the drain pump and float switch.
Steps to remove the heat exchanger.
Explains the functions of the remote controller buttons and display.
Explains the different display modes and icons on the remote.
Overview of the remote controller's menu navigation.
Configuration options available via the remote controller.
Functions and display of the PAC-YT53CRAU remote controller.
Functions and display of the PAR-SL101A-E remote controller.
Steps to view and understand error information.
Procedure to enter the maintenance password.
Test run procedure for PAR-41MAA remote controller.
Test run procedure for PAR-SL101A-E remote controller.
Setting unit functions using PAR-41MAA remote.
Setting unit functions using PAR-SL101A-E remote.
Steps to delete recorded error history.
Self-diagnosis procedure for PAR-41MAA remote.
Self-diagnosis procedure for PAR-SL101A-E remote.
Procedure to check the remote controller's functionality.
