To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric FR-E520S-2.2K-EC and is the answer not in the manual?
General| Model | FR-E520S-2.2K-EC |
|---|---|
| Series | FR-E500 |
| Rated Output Power | 2.2 kW |
| Horsepower | 3 HP |
| Input Voltage | 200-240 V |
| Input Phase | Single-phase |
| Output Voltage | 200-240 V |
| Output Phase | 3-Phase |
| Protection | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Output Frequency Range | 0.5 to 400 Hz |
| Control Method | V/f Control |
| Cooling Method | Fan Cooled |
| Protection Features | Overcurrent, Overvoltage |
| Operating Temperature | -10 to 50°C |
| Storage Temperature | -20 to 65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000 m |
| Vibration | 5.9 m/s² |
Instructions for connecting power and control circuits, including terminal diagrams.
Procedures for pre-operation checks and executing basic inverter operations.
Comprehensive list of all inverter parameters, their ranges, and factory settings.
Detailed explanations of specific parameters, their functions, and related settings.
Definitions, causes, and corrective actions for various inverter error codes.
