Mitsubishi Electric FR-PA07 User Manual

1
Enclosure surface operation panel
FR-PA07 INSTRUCTION MANUAL
INVERTER
Thank you for purchasing the enclosure surface operation panel (FR-PA07). This instruction manual
gives handling information and precautions for use of this product. Incorrect handling might cause
an unexpected fault. Before using this product, please read this manual carefully to use this product
to its optimum performance.
Please forward this instruction manual to the end user.
This product is an option dedicated for the FR-E800 */E700/D700/F700PJ/E700EX/D700-G series.
Refer to the inverter unit's Instruction manual for details on the operation panel functions, operation
methods and handling methods.
* Only the FR-E800 standard model is supported.
1. Connection
• Use the FR-CB20 connection cable. Insert one end of the cable into the PU connector on the
inverter, and the other end into the connection connector on the FR-PA07 along the guides until
the clips click into place. (For the details of the FR-CB20, refer to the Instruction Manual of the
FR-CB20.)
• To disconnect the cable, hold down the clip at the cable end and gently pull the connector.
Safety precautions
 Do not touch the setting dial or keys with wed hands. Doing so may cause an electric shock.
 Do not install and operate the enclosure surface operation panel (FR-PA07) if it is damaged
or has parts missing.
 Provide a safety backup device, such as an emergency brake, to protect machines and
product from hazardous conditions if the enclosure surface operation panel (FR-PA07)
becomes faulty.
 Static electricity in your body must be discharged before you touch the product. Otherwise
the product may be damaged.
 If halogens (including fluorine, chlorine, bromine, and iodine) contained in fumigants for wood
packages enter this product, the product may be damaged. Prevent the entry of fumigant
residuals or use an alternative method such as heat disinfection. Note that sterilization or
disinfection of wood packages should be performed before packing the product.
NOTE
Do not start operation with the inverter front cover removed.
Clip
FR-PA07 (back)
PU connector
Clip
Example: FR-E700

Mitsubishi Electric FR-PA07 Specifications

General

Output Frequency	0.5-400 Hz
Protection Class	IP20
Frequency Range	50/60 Hz
Cooling Method	Fan Cooling
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C

Summary

Safety Precautions

Connection

Operation Panel Overview

Indicators and Displays

Describes unit, monitor, operation mode, and rotation direction indicators and LED displays.

Control Buttons

Explains functions of start, stop, mode, and setting dial controls.

Operation Mode Selection

Details switching between PU and external operation modes.

Operation

Basic Operation Modes

Covers monitor/frequency setting, parameter setting, and fault history display.

Basic Operation Steps

Illustrates sequences for setting frequency, parameters, and clearing faults.

Operation Lock

Activating and Deactivating Operation Lock

Steps to lock/unlock the setting dial and keys using the MODE button.

Setting Dial Operation

Potentiometer Mode Usage

Using the setting dial to control frequency like a potentiometer.

Specifications

Standard Specifications

Lists environmental, power, and connection details for the operation panel.

Outline and Panel Cutting Drawings

Provides dimensions and panel cutout details for the FR-PA07.

Instructions and Restrictions

FR-E700 Series Inverter Restrictions

Notes limitations on parameter copy, initial value changes, and easy setting mode for specific serial numbers.

Serial Number Check

Guides users on checking the inverter's rating plate for serial number information.

Hazardous Substances

Restricted Substances Compliance

Details restricted hazardous substances in electronic and electrical products per Chinese regulations.