Mitsubishi Electric FR-PU07 User Manual

FR-PU07/FR-PU07BB INSTRUCTION MANUAL
D
INVERTER
INVERTER
Option unit
INSTRUCTION MANUAL
INVERTER
HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
1
2
3
4
6
5
FR-PU07
FR-PU07BB
Parameter unit
IB(NA)-0600240ENG-D(0901) MEE Printed in Japan Specifications subject to change without notice.
PRE-OPERATION INSTRUCTIONS
FUNCTIONS
FUNCTION MENU
OPERATION
SPECIFICATIONS
CHECK FIRST WHEN YOU
HAVE A TROUBLE

Mitsubishi Electric FR-PU07 Specifications

General

Input Frequency	50/60 Hz
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Frequency Range	0.5-400Hz
Protection Class	IP20
Type	Inverter
Output Frequency	0.5-400Hz
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating
Humidity	95% RH or less (non-condensing)
Altitude	Up to 1000m

Summary

PRE-OPERATION INSTRUCTIONS

1.1 Supporting inverter models

Lists the inverter models compatible with the FR-PU07 and FR-PU07BB.

1.2 Unpacking and Product Confirmation

Details on how to check the parameter unit after unpacking and confirm its contents.

1.2.2 Appearance and parts identification

Identifies the components and physical features of the FR-PU07 parameter unit.

1.2.3 Explanation of keys

Describes the function of each key on the parameter unit's operation panel.

1.3 Installation and Removal of FR-PU07

Provides instructions for installing and removing the FR-PU07 parameter unit from inverters.

1.4 Connection and Removal of FR-PU07BB

Details on connecting and removing the FR-PU07BB parameter unit, including battery operation.

1.5 Parameters to be Checked First

Highlights essential parameters that should be checked and set before initial operation.

FUNCTIONS

2.1 Monitoring Function

Explains how to monitor various inverter parameters and status indicators.

2.1.1 Display overview

Provides a detailed overview of the parameter unit's display elements and their meanings.

2.2 Frequency Setting

Describes methods for setting the inverter's operating frequency via the parameter unit.

2.2.1 Direct setting

Explains how to directly input the desired frequency using the numeric keypad.

2.3 Setting and Changing the Parameter Values

Guides users on how to read and modify inverter parameters using the parameter unit.

2.3.1 Specifying the parameter number to change the set value

Details the process of selecting a specific parameter number for modification.

2.5 Calibration of the Meter (Frequency Meter)

Instructions for calibrating the meter connected to the frequency terminal.

FUNCTION MENU

3.1 Overview of Function Menu

Introduces the function menu structure and navigation.

3.2 Operation Procedures for Functions

Provides step-by-step guides for various operational functions accessible via the menu.

3.2.1 Monitor function

Details on how to use the monitor function to view inverter status and data.

3.2.2 Selection of PU operation (direct input)

Explains how to select and operate the inverter using the parameter unit directly.

3.2.5 Parameter clear

Instructions for clearing inverter parameters to factory default settings.

3.2.9 Troubleshooting

Guides on identifying and resolving common inverter faults and operational issues.

3.2.12 Multiple copies

Describes how to copy parameter settings between inverters or store them on the unit.

3.3 Other Precautions

Provides additional important precautions for operating the parameter unit safely.

OPERATION

4.1 How to Select the Operation Mode

Explains how to switch between External, PU, and combined operation modes.

4.1.1 Switching from External operation mode [EXT] to PU operation mode [PU]

Step-by-step guide to switch operation mode from External to Parameter Unit.

4.2 How to Operate PU Operation

Provides instructions on operating the inverter using the parameter unit's interface.

4.2.1 Normal operation

Details on performing normal motor operation and speed control via the parameter unit.

4.3 Combined Operation (Operation Using External Input Signals and PU)

Describes operating the inverter using a combination of external signals and the parameter unit.

4.3.1 Entering the start signal from outside and setting the running frequency from the PU (Pr. 79 = 3)

How to use external start signals with PU frequency setting.

CHECK FIRST WHEN YOU HAVE A TROUBLE

5.1 Troubleshooting

A guide to diagnosing and resolving common issues and faults with the inverter and parameter unit.

SPECIFICATIONS

6.1 Standard Specifications

Lists the technical specifications for the FR-PU07 and FR-PU07BB parameter units.

6.2 Outline Drawing and Panel Cutting Drawing

Provides dimensional drawings and panel cut-out details for installation.

APPENDIX

Appendix 1 Disposing of the equipment in the EU countries

Information and guidelines for the proper disposal of the equipment in EU countries.