Mitsubishi Electric FX2N-8AD - Installation Procedures

Installation 4
4-1
4. Installation
Install the FX
2N
-8AD to the right side of a main unit, extension unit, extension block or special
block of the FX
0N
/FX
1N
/FX
2N
/FX
2NC
/FX
3U
/FX
3UC
Series PLC.
The FX
2N
-8AD can be installed with a DIN rail (DIN46277 of 35 mm in width) or directly
installed with screws M4. For the details, refer to the handy manual supplied together with the
PLC main unit.)
FX2N-8AD Analog input block