EasyManuals Logo

Mitsubishi Electric LDT32IV (BH548) User Manual

Mitsubishi Electric LDT32IV (BH548)
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
English-34
Product Specifications
LCD Module
Frequency
Pixel Clock
Viewable Size
Input Signal
PC-Input:
VIDEO Input:
AUDIO Input:
RS-232C:
Output Signal
PC-Output:
VIDEO Output:
AUDIO Output:
Speaker Output:
Resolutions Supported
Power Supply
Power Consumption
Operational
Environment
Storage
Environment
Dimension
Weight
VESA compatible arm
mounting interface
Complied Regulatory
and Guidelines
Power Management
Plug & Play
Accessories
Note: Technical specifications are subject to change without notice.
Diagonal:
Pixel Pitch:
Resolution:
Color:
Brightness:
Contrast Ratio:
Response time:
View Angle:
Design View Distance:
Horizontal:
Vertical:
Video:
Sync:
Input-terminal:
In:
Video:
Sync:
Output-terminal:
Power Save:
Temperature:
Humidity:
Temperature:
Humidity:
Net without stand:
Net with stand:
Gross:
Net without stand:
Net with stand:
Gross:
Digital Input
31.5kHz - 91.1kHz
50.0/58.0 - 85.0Hz
25.0MHz - 165.0MHz
TMDS
DVI-D (HDCP)
Analog Input
37"/94.0cm
0.600mm
1366 x 768 dots
Over 16 million colors (depending on video card used)
500cd/m2 (typ.)
1200:1 (typ.)
12ms (typ.)
Up 88°/Down 88°/Left 88°/Right 88°(typ.) @CR>10
1000mm/39.4inches
31.5kHz - 91.1kHz
50.0/58.0 - 85.0Hz
13.5MHz -165.0MHz
819.60 x 460.80mm/32.3 x 18.1inches
Analog RGB Video:0.7Vp-p
Input impedance 75ohm
Separate HV sync: TTL level (Pos./Neg.)
Input Impedance:2.2K ohm
BNC (R,G,B,H,V), 15Pin Mini D-sub
Composite:1.0Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y:1Vp-p C:0.286Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component:1.0/0.7Vp-p
Input Impedance 75ohm BNC-INPUT
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
9 Pin Mini D-sub
Analog RGB Video:0.7Vp-p with 75 ohm terminated
Separate HV sync: TTL level (Pos./Neg.)
15Pin Mini D-sub
BNC-OUTPUT x 1, Composite 1.0Vp-p with 75 ohm terminated
RCA PIN-JACK L/R OUTPUT x 1, 0.15Vrms with 47k ohm terminated
External Speaker Jack 7W + 7W (8 ohm)
640 x 480 at 60Hz to 85Hz
800 x 600 at 50Hz, 60Hz to 85Hz
1024 x 768 at 50Hz, 60Hz to 85Hz
1280 x 768 at 50Hz, 60Hz to 85Hz
1360 x 768 at 50Hz, 60Hz* to 85Hz
1280 x 1024 at 60Hz to 85Hz
1600 x 1200 at 60Hz.....................Maximum Resolution
* Recommended Resolution
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i
2.1 - 0.9A @100 - 240VAC, 50/60Hz
Max 195W
Less than 5W (Power button OFF/Main power switch ON)
5 - 40°C/ 41 - 104°F
20 - 80% (Without condensation)
-20 - 60°C /- 4 - 140°F
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
909mm(W) x 545.8mm(H) x 133mm(D)/35.79"(W) x 21.49"(H) x 5.24"(D)
909mm(W) x 604.9mm(H) x 246mm(D)/35.79"(W) x 23.81"(H) x 9.69"(D)
1045mm(W) x 710mm(H) x 346mm(D)/41.14"(W) x 27.95"(H) x 13.62"(D)
44.1lbs/20kg (Approximately)
48.5lbs/22kg (Approximately)
62.83lbs/28.5kg
12 Holes (100mm pitches)
Optional Multi-purpose Fix Mount
UL60950-1/C-UL/TUV-GS/EN60950-1/BSMI/PSB/FCC-B/DOC-B/EN55022-B
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/GOST
VESA DPM
VESA DDC2B, DDC/CI
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2, Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder,
Main switch cover
Specifications (LDT371V) : BJ544

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Electric LDT32IV (BH548) and is the answer not in the manual?

Mitsubishi Electric LDT32IV (BH548) Specifications

General IconGeneral
BrandMitsubishi Electric
ModelLDT32IV (BH548)
CategoryMonitor
LanguageEnglish

Related product manuals