30
4 PROCEDURES BEFORE OPERATION
4.5 Initializing the CPU Module
When RS-232C cable is used
Connect a personal computer directly to the CPU module, following the procedure below.
*1 When connecting by RS-232C cable, an expansion board or expansion adapter is required.
4.5 Initializing the CPU Module
Initialize the CPU module.
[Online] [CPU Memory Operation]
Procedure
1. Connect a personal computer to the CPU module using the RS-
232C cable.
*1
2. Select [Online] [Current Connection Destination] on the
menubar of the engineering tool.
3. Click the [CPU Module Direct Coupled Setting] button (1) on the
"Specify Connection Destination Connection" window.
4. Select [RS-232C] for the connection method, and click the [Yes]
button.
5. Click the [Connection Test] button (2), and check if the personal
computer is connected to the CPU module.
1. Select "Data Memory" on the "Memory Management" window,
and click the [Initialization] button.
2. After the initialization processing completes, click the [Close]
button.
To Next Page
Loading...
