Mitsubishi Electric MELSEC iQ-F Series - Page 42

2 OPERATING GX Works3
2.4 Creating a Ladder Program
2 - 21
2
2.4.1 Creating a ladder program by entering devices and
labels
Operating procedure
1. Move the cursor to the position where a ladder
is added, and enter "X102". (When entering of
the number starts, the ladder input window
appears.)
To cancel an incorrect entry, press the 
key.
2. To confirm the entry, press the  key.
• Clicking the [OK] button also confirms the entry.
• Clicking the [Cancel] button also cancels the
entry.
3. The added symbol ( ) is displayed.
4. Move the cursor to the next position and enter
"X100".
5. Press the  key.
6. The added symbol ( ) is displayed.
7. Select the symbol and press the "/" key to
switch the symbol with ( ).
(To the next page)
1.
Enter the I/O number!
2.
Press the
Enter key!
4.
Enter the I/O number!
3.
The symbol is displayed!
5.
Press the
Enter key!
X102
6.
The symbol is displayed!
X100
7.
The symbol is changed!
X100