Mitsubishi Electric MELSEC iQ-F Series - Page 43

2 - 22
2 OPERATING GX Works3
2.4 Creating a Ladder Program
(From the previous page)
8. Move the cursor to the next position and enter
"Y170".
9. Press the  key.
10. The added symbol ( ) is displayed.
11. Move the cursor to the next position, enter
"Y170", and select "Open Branch".
12. Press the  key.
13. The added symbol ( ) is displayed.
14. Move the cursor to the ladder under .
15. Enter "X103".
16. Press the  key.
(To the next page)
8.
Enter the I/O number!
9.
Press the
Enter key!
10.
The symbol is displayed!
11.
12.
Press the
Enter key!
Enter "Y170" and
select "Open Branch"!
Y170
13.
The symbol is displayed!
14.
Move the cursor!
15.
Enter the I/O number!
16.
Press the
Enter key!
Y170
Y170