Mitsubishi Electric MELSEC iQ-F Series - Page 44

2 OPERATING GX Works3
2.4 Creating a Ladder Program
2 - 23
2
(From the previous page)
17. The added symbol ( ) is displayed.
18. Move the cursor to the next position and enter
"Y171".
19. Press the  key.
20. The added symbol ( ) is displayed.
21. Creating a ladder program is completed.
17.
The symbol is displayed!
18.
Enter the I/O number!
19.
Press the
Enter key!
X103
20.
The symbol is displayed!
Y171