Mitsubishi Electric MELSEC iQ-F Series - Ethernet Connection

2 OPERATING GX Works3
2.4 Creating a Ladder Program
2 - 27
2
2.4.3 Creating a ladder program with tool buttons
Operating procedure
1. Click on the toolbar to open the ladder
input window, and enter "X102".
To cancel an incorrect entry, press the 
key.
2. To confirm the entry, press the  key.
• Clicking the [OK] button also confirms the entry.
• Clicking the [Cancel] button also cancels the
entry.
3. The added symbol ( ) is displayed.
4. Click on the toolbar and enter "X100".
5. Press the  key.
6. The added symbol ( ) is displayed.
7. Click on the toolbar and enter "Y170".
8. Press the  key.
(To the next page)
1.
2.
Press the
Enter key!
Click and enter
the I/O number!
4.
3.
The symbol is displayed!
5.
Press the
Enter key!
Click and enter
the I/O number!
X102
6.
The symbol is displayed!
7.
8.
Press the
Enter key!
Click and enter
the I/O number!
X100