Mitsubishi Electric MELSEC iQ-F Series - Page 49

2 - 28
2 OPERATING GX Works3
2.4 Creating a Ladder Program
(From the previous page)
9. The added symbol ( ) is displayed.
10. Click on the toolbar and enter "Y170".
11. Press the  key.
12. The added symbol ( ) is displayed.
13. Move the cursor to the ladder under .
14. Click on the toolbar and enter "X103".
15. Press the  key.
16. The added symbol ( ) is displayed.
17. Click on the toolbar and enter "Y171".
18. Press the  key.
(To the next page)
9.
The symbol is displayed!
10.
11.
Press the
Enter key!
Click and enter
the I/O number!
Y170
12.
The symbol is displayed!
13.
Move the cursor!
14.
15.
Press the
Enter key!
Click and enter
the I/O number!
Y170
Y170
16.
The symbol is displayed!
17.
18.
Press the
Enter key!
Click and enter
the I/O number!
X103