204
1 FUNCTIONS
1.15 Simple CPU Communication Function (RJ71EN71, RnENCPU (Network Part))
■When the communication destination is Yokogawa FA-M3 series
*1 The device is displayed in units of bits. (One point corresponds to one bit.)
*2 The setting can be made only when the communication pattern is "Read".
*3 The setting range of the last two digits is "01" to "64". (Only "01", "17", "33", or "49" can be set as the start device. Only "16", "32", "48",
or "64" can be set as the end device.
*4 Use "1" or "a multiple of 16 +1" to set the start device.
Type Applicable device
Symbol Range
Bit device
*1
X
*2
201 to 71664
*3
Y 201 to 71664
*3
I 1 to 165535
*4
E 1 to 4096
*4
L 1 to 78192
*4
M 1 to 9984
*4
Word device D 1 to 65535
R 1 to 4096
V 1 to 256
B 1 to 262144
W 1 to 78192
Z 1 to 1024
TP 1 to 3072
CP 1 to 3072
TS 1 to 3072
CS 1 to 3072
TI 1 to 3072
CI 1 to 3072
To Next Page
Loading...
