2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATION
(4) Supported software packages
The following table lists the compatibility between the systems using the QD75 and
the software packages. GX Developer is required for use of the QD75.
Software version
GX Developer GX Configurator-QP
Single PLC
system
Version 7 or more
Q00J/Q00/Q01CPU
Multiple PLC
system
Version 8 or more
Single PLC
system
Version 4 or more
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple PLC
system
Version 6 or more
Version 2.10L or more
Single PLC
system
Q12PH/Q25PHCPU
Multiple PLC
system
Version 7.10L or more
Version 2.13P or
more
For use on MELSECNET/H remote
I/O station
Version 6 or more Version 2.10L or more
To Next Page
Loading...