Need help?Do you have a question about the Mitsubishi Electric MR-J3-40A and is the answer not in the manual?
General| Model | MR-J3-40A |
|---|---|
| Category | Servo Drives |
| Manufacturer | Mitsubishi Electric |
| Rated Output | 0.4 kW |
| Ambient Operating Temperature | 0 to 55 °C |
| Storage Temperature | -20 to 65 °C |
| Rated Voltage | 3-phase 200 to 230 VAC |
| Feedback System | Absolute / Incremental Encoder |
| Communication Interface | RS-485 |
| Protection Features | Overcurrent, Overvoltage |
| Ambient Humidity | 90% RH or less (non-condensing) |
| Input Power Supply | 3-phase 200 to 230 VAC 50/60 Hz |
Precautions for preventing electric shock when wiring, operating, or inspecting the servo amplifier.
Precautions for preventing fire hazards related to installation and component usage.
Measures to prevent injury from electrical shock, heat, or improper handling of components.
Overview of the replacement flow for MR-J3/MR-J3W series systems with MR-J4 series.
Describes the step-by-step process for reviewing and performing the replacement.
Compares the differences in specifications and functions between MR-J3-_A_ and MR-J4-_A_ series.
Compares the specifications and functions between MR-J3-_B_ and MR-J4-_B_ series.
Compares the specifications and functions between MR-J3W-_B and MR-J4W2-_B series.
Provides information on servo motor replacement and compatibility.
Lists substitute servo motor models and their compatibility.
Provides essential safety warnings and precautions before starting operation.
To Next Page