Do you have a question about the Mitsubishi Electric MR-JET- G Series and is the answer not in the manual?
Series | MR-JET-G |
---|---|
Type | Servo Drive |
Communication | SSCNET III/H |
Feedback System | Absolute position encoder |
Protection Class | IP20 |
Protection Functions | Encoder Error |
Ambient Temperature | 0°C to 55°C (32°F to 131°F) |
Vibration Resistance | 5.9 m/s² (0.6G) at 10Hz to 55Hz |
Storage Temperature | -20°C to 65°C (-4°F to 149°F) |
Features and benefits of Mitsubishi Electric FA electronic book manuals.
Overview of manuals required for safe and proper servo system operation.
Table for converting SI units to U.S. customary units for various quantities.
Overview of error handling and troubleshooting procedures for servo systems.
Explains alarm/warning codes, motor stop methods, and deactivation procedures.
Detailed troubleshooting steps for specific servo amplifier alarms and warnings.
Solutions for errors related to power supply, memory, CPU, and board malfunctions.
Troubleshooting for encoder communication issues and general communication errors.
Addresses motor compatibility, regenerative errors, and main circuit faults.
Troubleshooting control, parameter, speed, and position detection issues.
Guidance for resolving overload, overheating, overspeed, and related warnings.
Troubleshooting network, homing, battery, and other special warnings.
Identifies and resolves common issues that do not trigger system alarms.
Troubleshooting display indicators and basic motor operation problems.
Resolving issues with motor vibration, speed accuracy, overshoot, and position deviations.
Addressing communication failures, brake malfunctions, and system-level problems.
Details changes made to the manual across different revision dates.
Outlines the warranty terms, limitations, and conditions for product failures.
Specifies limitations on warranty liability, including loss of opportunity and secondary damages.
Lists trademarks and registered trademarks for products and companies.