To Next PageTo Next PageWhat to do if my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA unit does not cool or heat very well?
If your Mitsubishi Electric Heat Pump isn't cooling or heating effectively, try cleaning the filter. This can often resolve the issue.
What to do if H0 is displayed on my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA remote controller?
If 'H0' is displayed on your Mitsubishi Electric Heat Pump remote controller, it indicates that an automatic startup test is in progress. This test will last for about two minutes.
Why does the air flow direction of my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA suddenly change?
After one hour of cooling-mode operation with the air flow in a downward direction, the Mitsubishi Electric Heat Pump unit will automatically change to the 'Horizontal air flow' mode.
Why can't I start or stop my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA Heat Pump right after restarting it?
If the start and stop functions are unavailable immediately after restarting your Mitsubishi Electric Heat Pump, wait about three minutes. The operation has been stopped to prevent damage to the air conditioner.
Why is there white mist coming from my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA Heat Pump indoor unit?
A white mist may be expelled from the indoor unit of your Mitsubishi Electric Heat Pump just after it is turned on when there's a high level of humidity in the room.
What to do if the remote controller indicators of my Mitsubishi Electric Heat Pump don't light up?
If the indicators on your Mitsubishi Electric Heat Pump remote controller do not light up when operated, turn on the power switch. ' · ' will be displayed.
What to do if an error code is displayed on my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA Heat Pump remote controller?
If an error code appears on your Mitsubishi Electric Heat Pump remote controller and the receiver's operating display is flashing, the unit is performing a self-diagnostic to protect itself. Do not attempt repairs yourself. Turn off the main switch and contact your dealer, providing the unit name and the information displayed on the remote controller.
Why does my Mitsubishi Electric Mr. Slim PUH-P1.6VGAA Heat Pump stop heating before reaching the set temperature?
Your Mitsubishi Electric Heat Pump might stop heating before reaching the set temperature because frost forms when the outdoor temperature is low and humidity is high. Wait about 10 minutes for the frost to melt.
What does 'CENTRALLY CONTROLLED' mean on my Mitsubishi Electric Heat Pump remote controller?
When 'CENTRALLY CONTROLLED' is displayed on your Mitsubishi Electric Heat Pump remote controller, the start and stop functions of the remote controller are unavailable.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr. Slim PUH-P1.6VGAA |
| Category | Heat Pump |
| Language | English |
Details heat pump specifications for refrigerant R407C.
Provides electrical data for the heat pump with R407C refrigerant.
Performance data for cooling capacity of PMH-P1BA model at 240V.
Performance data for cooling capacity of PMH-P1.6BA model at 240V.
Performance data for cooling capacity of PMH-P2BA model at 240V.
Performance data for heating capacity at 240V.
Guidelines for determining the correct installation location and ceiling opening size.
