Need help?Do you have a question about the Mitsubishi Electric Mr.Slim PUHZ-ZRP100YKA and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr.Slim PUHZ-ZRP100YKA |
| Category | Heat Pump |
| Language | English |
Lists and illustrates parts of the indoor unit, including fan, vane, and filter.
Introduces the wired remote controller interface and buttons.
Explains the different display modes and icons used on the remote controller.
Details the functions of various buttons on the wireless remote controller.
Explains the meaning of different icons displayed on the wireless remote controller.
Step-by-step guide for installing and replacing batteries in the remote controller.
Instructions for powering the air conditioner unit on and off.
Guide to selecting different operating modes like Cool, Dry, Fan, Auto, and Heat.
How to adjust the desired temperature for different operation modes.
Instructions on how to change the fan speed settings.
Guide to adjusting the airflow direction of the unit.
How to configure vane and vent settings, especially for Lossnay units.
Setting a fixed direction for the up/down airflow of specific outlets.
Procedure for manually setting the vane angle using a wired remote.
Configuration of the 3D i-see sensor for enhanced functionality.
Setting airflow direction control methods when the direction is set to Auto.
Details on energy-saving features like occupancy detection and auto-off.
Adjusting airflow based on seasonal conditions and thermostat status.
Information on ventilation options and how to operate them.
How to check filter status and when cleaning is required.
Step-by-step instructions for cleaning the air filters.
To Next Page
