To Next PageTo Next PageHow to troubleshoot reoccurring issues with a Mitsubishi Electric Mr. Slim PUHZ-RP71VHA4?
If you're experiencing a recurring problem with your Mitsubishi Electric Air Conditioner, determine the source of the issue and take appropriate corrective measures as outlined in the “11-4. Self-diagnosis action table”.
What to do if Mitsubishi Electric Mr. Slim PUHZ-RP71VHA4 Air Conditioner trouble is not reoccurring and is logged?
If the trouble with your Mitsubishi Electric Air Conditioner isn't happening consistently and is logged, it might be due to temporary issues like protection devices activating in the refrigerant system (including the compressor), loose wiring, or electrical interference. To address this, re-examine the issue, inspect the installation area, check the refrigerant level, note the weather conditions when the problem occurred, and verify the wiring. After servicing, clear the error code logs and restart the unit. This indicates that the electrical components, controller board, and remote controller are functioning correctly.
What to do if Mitsubishi Electric Mr. Slim PUHZ-RP71VHA4 trouble is not reoccurring and is not logged?
If the issue with your Mitsubishi Electric Air Conditioner is not consistently happening and isn't being recorded, double-check the unusual symptoms. Troubleshoot to pinpoint the cause, referring to “11-5. Troubleshooting by inferior phenomena”. If you can't find the cause, keep using the unit for now. This suggests that parts like the electrical components, controller board, and remote controller are working as they should.
General| Series | Mr. Slim |
|---|---|
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Refrigerant | R410A |
| Power Supply | 220-240 V, 50 Hz |
Emphasizes disconnecting power before access and observing general safety rules.
Details specific precautions when working with R410A refrigerant.
Explains the pre-charged refrigerant system for simplified installation.
Describes the function to detect refrigerant leaks over time.
Details troubleshooting steps based on recurring or non-recurring issues and error codes.
Lists checks to perform before and during a test run.
Guides on how to perform self-diagnosis when a problem occurs or during maintenance.
Provides a table of actions to take for abnormalities detected when power is supplied.
