Mitsubishi Electric Mr.SLIM SEZ-M35DA User Manual (English)

Other manuals for Mitsubishi Electric Mr.SLIM SEZ-M35DA

Technical & Service Manual51 pages

Installation Manual172 pages

Questions and Answers:

A
Ashley DanielsAug 21, 2025
How to fix Mitsubishi Electric Air Conditioner not cooling or heating well?
- M
  Martha RayAug 21, 2025
  If your Mitsubishi Electric Air Conditioner isn't heating or cooling effectively, start by cleaning the filter, as reduced airflow can occur when it's dirty or clogged. Also, ensure the temperature is properly adjusted. Check that there's sufficient space around the outdoor unit and that the indoor unit's air intake or outlet isn't blocked. Finally, make sure no doors or windows are left open.
R
rebecca44Aug 22, 2025
Why can't I set the timer on my Mitsubishi Electric Mr.SLIM SEZ-M35DA Air Conditioner?
- H
  heather58Aug 22, 2025
  If you cannot set the timer on your Mitsubishi Electric Air Conditioner remote controller, check if the timer settings are invalid. If the timer can be set, will appear in the remote controller display.
A
aruizAug 25, 2025
What to do if Mitsubishi Electric Air Conditioner won't turn on after turning off?
- D
  Daniel ShortAug 25, 2025
  If your Mitsubishi Electric Air Conditioner does not operate after restarting it soon after stopping, wait approximately three minutes.
K
Kenneth PatelAug 27, 2025
Why does my Mitsubishi Electric Mr.SLIM SEZ-M35DA turn on by itself?
- G
  griceAug 27, 2025
  If your Mitsubishi Electric Air Conditioner operates without pressing the ON/OFF button, check if the on timer is set and press the ON/OFF button to stop operation. Also, determine if the air conditioner is connected to a central remote controller; if so, consult the relevant people. Check if “ ” appears on the remote controller display and consult the concerned people who control the air conditioner. Finally, see if the auto recovery feature from power failures has been set, and if so, press the ON/OFF button to stop operation.
M
morrisadrienneAug 28, 2025
Why does my Mitsubishi Electric Mr.SLIM SEZ-M35DA Air Conditioner stop by itself?
- M
  matthew23Aug 28, 2025
  If your Mitsubishi Electric Air Conditioner stops without pressing the ON/OFF button, first, check if the off timer is set and press the ON/OFF button to restart operation. Also, determine if the air conditioner is connected to a central remote controller; if so, consult the relevant people. Check if “ ” appears on the remote controller display and consult the concerned people who control the air conditioner.
A
Andrea RamirezAug 30, 2025
Why is water or vapor emitted from my Mitsubishi Electric Mr.SLIM SEZ-M35DA outdoor unit?
- E
  Erin JohnsonAug 30, 2025
  If your Mitsubishi Electric Air Conditioner emits water or vapor from the outdoor unit during cooling mode, water may form and drip from the cool pipes and joints. During heating mode, water may form and drip from the heat exchanger. During defrosting mode, water on the heat exchanger evaporates, emitting water vapor.
K
Kevin OliverAug 31, 2025
Why does my Mitsubishi Electric Mr.SLIM SEZ-M35DA make cracking noises?
- T
  Todd FordAug 31, 2025
  If you hear cracking or creaking sounds from your Mitsubishi Electric Air Conditioner, these sounds occur when parts rub against each other due to expansion and contraction from temperature changes.
C
Caitlin MonroeSep 2, 2025
Why isn't warm air blowing from my Mitsubishi Electric Air Conditioner when heating starts?
- M
  Michael PhillipsSep 2, 2025
  If warm air doesn't blow from the indoor unit of your Mitsubishi Electric Air Conditioner when heating starts, it's because warm air does not blow until the indoor unit has sufficiently warmed up.
M
Matthew AliSep 4, 2025
Why does my Mitsubishi Electric Mr.SLIM SEZ-M35DA emit white mist?
- Z
  Zachary RobinsonSep 4, 2025
  If a white mist or vapor is emitted from the indoor unit of your Mitsubishi Electric Air Conditioner, this may happen when the indoor temperature and humidity are high when operation starts. Also, during defrosting mode, cool airflow may blow down and appear like a mist.
N
Nathan FranklinSep 5, 2025
Why does my Mitsubishi Electric Mr.SLIM SEZ-M35DA stop before reaching set temperature?
- D
  David WaltersSep 5, 2025
  If your Mitsubishi Electric Air Conditioner stops before reaching the set temperature in heating mode, frost may form on the outdoor unit when the outdoor temperature is low and the humidity is high. Normal operation should begin after approximately 10 minutes.