To Next PageTo Next PageWhy does my Mitsubishi Electric Air Conditioner smell bad?
If your Mitsubishi Electric Air Conditioner has an unpleasant odor, the indoor unit draws in air containing gases from walls, carpeting, and furniture, as well as odors trapped in clothing, and blows this air back into the room.
Why aren't the vanes moving on my Mitsubishi Electric Mr.SLIM SEZ-M35DA Air Conditioner?
If the vanes of your Mitsubishi Electric Air Conditioner do not move or the indoor unit does not respond to input from the wireless remote controller, the junction wire connectors of the vane motor and signal receiver may not be connected correctly. Have an installer check the connections, ensuring the colors of the male and female sections of the junction wire connectors match.
Why does the airflow direction change on my Mitsubishi Electric Mr.SLIM SEZ-M35DA Air Conditioner?
If the airflow direction changes during operation or cannot be set on your Mitsubishi Electric Air Conditioner, during heating mode, the vanes automatically move to the horizontal airflow direction when the airflow temperature is low or during defrosting mode.
Why do the vanes move past the set position on my Mitsubishi Electric Mr.SLIM SEZ-M35DA Air Conditioner?
If, when changing the airflow direction on your Mitsubishi Electric Air Conditioner, the vanes always move up and down past the set position before stopping, it is because the vanes move to the set position after detecting the base position.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | Mr.SLIM SEZ-M35DA |
| Category | Air Conditioner |
| Language | English |
Procedure for turning the air conditioner unit on and off using wired or wireless remote controllers.
How to select different operating modes such as Cool, Dry, Fan, Auto, and Heat.
Instructions on adjusting the desired temperature for cooling, dry, heat, and auto modes.
How to operate the unit using emergency buttons when the remote control is not functional.
Advice on choosing a suitable installation location and avoiding places with flammable gas or oil.
Guidelines for electrical connections, including using exclusive circuits and proper grounding.
