To Next PageTo Next PageWhat to do if my Mitsubishi Electric Air Conditioner fails to connect to the router?
If your Mitsubishi Electric Air Conditioner fails to connect to the Router and is starting up the indoor unit connection, check the DHCP Settings of the Router, or check IP address settings of the Wi-Fi interface.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 798 x 299 x 219 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 285 mm |
| Weight (Indoor Unit) | 9.5 kg |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A+++ |
| Energy Efficiency Class Heating | A++ |
| Noise Level (Outdoor Unit) | 50 dB(A) |
| Sound Level (Indoor) | 19 dB(A) |
| Noise Level (Indoor Unit) | 19-45 dB(A) |
Explains symbols on indoor and outdoor units related to safety.
Defines various symbols used within the manual for safety instructions.
Details safety precautions specifically related to the installation of the air conditioner.
Outlines crucial safety warnings and guidelines for using the Wi-Fi interface.
Provides step-by-step instructions for inserting batteries into the remote controller.
Provides steps to program the air conditioner's operation schedule for the entire week.
Step-by-step guide to connect the Wi-Fi interface using Access Point Mode.
Instructions for setting up the Wi-Fi interface via WPS-Push pairing with a router.
Provides common Wi-Fi connection issues and their solutions.
Lists common problems with the indoor unit and their explanations/checks.
Covers issues related to the remote controller and the unit's response.
Addresses problems that may occur with the outdoor unit of the air conditioner.
