Need help?Do you have a question about the Mitsubishi Electric MSZ-FB50VA and is the answer not in the manual?
General| Cooling Capacity | 5.0 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Weight (Indoor Unit) | 11 kg |
| Weight (Outdoor Unit) | 37 kg |
| Indoor Unit Weight | 11 kg |
| Outdoor Unit Weight | 37 kg |
Explains symbols indicating warnings, cautions, and required actions in the manual.
Provides definitions for safety symbols like "Do not", "Follow", "Danger", "Disconnect".
Details precautions against electric shock, fire, and improper handling.
Covers safe installation practices, earthing, and considerations for specific environments.
Identifies and illustrates the parts of the indoor and outdoor units.
Details the buttons and functions of the remote control.
Guides on inserting batteries and setting the current time for the remote controller.
Explains how to adjust the slide switch based on the indoor unit's installation location.
Describes activating the i-see sensor and its temperature measurement function.
Details the different AREA modes (AUTO, Left, Right, Cancel) for targeted conditioning.
Explains AUTO, COOL, DRY, and HEAT modes for controlling the air conditioner.
Covers emergency operation and auto restart function for convenience and safety.
Details manual and automatic adjustment of vertical vanes for airflow direction.
Explains how to adjust fan speed from AUTO to Super High.
Describes how to adjust horizontal vanes for airflow direction.
General guidelines and safety measures before cleaning the unit.
Instructions for cleaning the heat exchanger, air filter, front panel, and fan.
Details cleaning and replacement intervals for air filters and plasma filters.
Lists common symptoms and their possible causes/solutions for the indoor unit.
Identifies symptoms related to the outdoor unit and their explanations.
Covers problems with the remote controller, air not blowing, and strange air smells.
Explains unusual sounds and operational issues like abrupt stops or starts.
Guidance on ideal and unsuitable locations, and electrical requirements.
Steps for preparing the unit for long periods of non-use and for restarting it.
Lists the acceptable operating temperature limits for cooling and heating.
To Next Page