To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric MSZ-GA80VA and is the answer not in the manual?
General| Cooling Capacity | 8.0 kW |
|---|---|
| Heating Capacity | 9.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R22 |
| Weight (Outdoor Unit) | 62 kg |
| Type | Split System |
Explains symbols like 'Be sure not to do' and 'Be sure to follow' used in the manual.
Shows where warning marks are located on the unit.
Identifies components of the indoor air conditioner unit.
Identifies components of the outdoor air conditioner unit.
Installation warnings including professional installation and flammable gas risks.
Installation cautions regarding earthing and earth leakage breakers.
Instruction to connect the power supply plug and turn on the breaker.
Guide for inserting batteries and setting the remote controller's current time.
Guidelines for remote controller range, care, and holder installation.
Procedure for using the emergency operation switch when the remote is unavailable.
Details the auto restart function that resumes operation after a power failure.
Notes on operating multiple indoor units with one outdoor unit simultaneously.
How to select fan speed and adjust air flow direction using the remote controller.
How air flow direction automatically adjusts based on the selected operation mode.
Operation for extending air flow reach by increasing fan speed and adjusting vane position.
Energy-saving cooling mode that automatically adjusts temperature and airflow for comfort.
Explains Econo Cool's function of providing cooler feel with energy savings by adjusting airflow.
Instructions for setting timers to automatically turn the unit on or off at scheduled times.
Steps to resume operation after a long period of inactivity.
Safety precautions to take before performing any maintenance tasks.
Instructions on how to clean the indoor unit's exterior and front panel.
Explanation of the catechin air filter's properties and benefits.
Guidance on when and how to replace the air cleaning filter.
Troubleshooting steps if the air conditioner cannot be operated.
Reasons for insufficient cooling or heating and checks to perform.
Explains the auto restart feature and its behavior after power interruption.
Recommends locations to avoid for installation, e.g., with flammable gas or oil.
Requirements for electrical connections, circuit protection, and proper earthing.
Advice on periodic inspection and maintenance by specialists.
States that relocating the unit requires special techniques and professional service.
