To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-GL06NA-U1 Air Conditioner indoor control system is not reading data?
If the Mitsubishi Electric Air Conditioner's indoor control system cannot properly read data in the nonvolatile memory of the indoor electronic control P.C. board, you should replace the indoor electronic control P.C. board.
What to do if my Mitsubishi Electric MSZ-GL06NA-U1 Air Conditioner has other abnormality?
If your Mitsubishi Electric Air Conditioner shows other abnormality, check the stop valve, the 4-way valve and check the abnormality in detail using the failure mode recall function for outdoor unit.
General| Cooling Capacity | 6, 000 BTU/h |
|---|---|
| Power Supply | 208-230V/1Ph/60Hz |
| Refrigerant | R410A |
| Sound Level | 19 dB (Indoor), 49 dB (Outdoor) |
| EER (Energy Efficiency Ratio) | 12.1 |
| HSPF (Heating Seasonal Performance Factor) | 10.3 |
| Indoor Unit Dimensions (W x H x D) | 28-1/8 x 11-5/8 x 8-7/8 inches |
| Outdoor Unit Dimensions (W x H x D) | 30.0 x 21.5 x 11.8 inches |
| Indoor Unit Weight | 22 lbs |
| Outdoor Unit Weight | 65 lbs |
| Operating Temperature (Cooling) | 14° to 115°F (-10° to 46°C) |
| Operating Temperature (Heating) | 14°F to 75°F |
Details operational voltage, temperature, and humidity limits for indoor units.
Provides airflow, air speed, and coverage data for various indoor unit models.
Explains how to shorten timer settings for service purposes.
Details modifications to the P.C. board for individual unit control.
Describes the automatic restart feature and how to disable it.
Illustrates remote control buttons and functions for different model series.
Explains the meaning of the operation indicator lamp states.
Covers COOL, DRY, HEAT, FAN, and I FEEL CONTROL operations.
Describes automatic switching between COOL and HEAT modes for MSZ models.
Explains the auto vane control for horizontal and vertical airflow adjustment.
Guides on setting ON and OFF timers for unit operation.
Details how to set and cancel the SMART SET operation mode.
Describes emergency and test run operations for servicing.
Explains the 3-minute time delay function for compressor protection.
Provides instructions on switching between Fahrenheit and Celsius temperature displays.
Lists important precautions and checks before starting troubleshooting procedures.
Explains how to recall and check stored failure modes of the unit.
Provides a flowchart for troubleshooting unit operation issues.
Lists common symptoms, conditions, and remedies for unit abnormalities.
Details resistance criteria for checking key components like thermistors and motors.
Step-by-step guide for diagnosing indoor fan motor issues.
Troubleshooting guide for remote controller and P.C. board communication issues.
Diagnostic steps for indoor P.C. board and fan motor problems.
Procedure for identifying and correcting wiring and serial signal errors.
Instructions for disassembling panels on specific indoor unit models.
Instructions for disassembling panels on specific indoor unit models.
Instructions for disassembling panels on specific indoor unit models.
Step-by-step guide for correctly mounting the indoor coil thermistor.
