To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-GL18NA Air Conditioner indoor control system is not reading data?
If the Mitsubishi Electric Air Conditioner's indoor control system cannot properly read data in the nonvolatile memory of the indoor electronic control P.C. board, you should replace the indoor electronic control P.C. board.
What to do if my Mitsubishi Electric Air Conditioner has other abnormality?
If your Mitsubishi Electric Air Conditioner shows other abnormality, check the stop valve, the 4-way valve and check the abnormality in detail using the failure mode recall function for outdoor unit.
General| Cooling Capacity | 18, 000 BTU/h |
|---|---|
| Heating Seasonal Performance Factor (HSPF) | 10.0 |
| Refrigerant | R410A |
| Outdoor Unit Dimensions (W x H x D) | 31-1/2 x 21-5/8 x 11-1/4 inches |
| Voltage | 208/230 V |
| Power Supply | 1 Phase, 60 Hz |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Sound Level (Indoor) | 45 dB(A) |
| Operating Temperature (Heating) | 75°F |
Details system integration and control options for various Mitsubishi indoor units.
Advanced MA remote controller with large dot LCD, multi-language display, and weekly timer.
Simple MA remote controller for CITY MULTI series enabling setting of indoor unit functions.
Interface for connecting multiple air conditioners to M-NET system or as wired remote.
Enables indoor unit communication with kumo cloud™ app and web via Wi-Fi.
Adapter for inputting signals from open/close switch and outputting ON/OFF signals.
Enables the use of a wireless remote controller.
Wireless remote controller for P series and SEZ models, requiring a receiver.
Picks up room temperature at a remote position for precise control.
Adapter for controlling multiple units with a multiple remote control display.
Extracts non-voltage contact output for operation/stop input functions.
Provides non-voltage contact outputs for signals and operation/stop input.
Connects A-control MXZ models to M-NET via M-NET converter for monitoring/control.
